Flooring brushing and floor paint building may seem like the same, both are painting the surface area of the floor, but in reality there is a huge difference in the construction procedure.
In actual building, lots of customers are lulled into utilizing floor brush paint rather of floor construction.
Standard floor covering paint is a thin layer of paint on the ground, the main purpose is lovely, but the functionality is bad, easy to delaminate, peeling, falling off, not pressure, wear-resistant, but the rate is more affordable than the basic construction of the flooring paint majority. And contemporary basic flooring paint building is a multi-step procedure to achieve.
Different substrate treatments
Traditional painting does not take notice of the treatment of the substrate, often the concrete is covered with primer without any treatment, some only slightly treated, the treatment is shovel a shovel, sweep, get rid of dust just.
1. Requirements for concrete floorings.
Concrete is needed to be flat and compact with a strength of not less than C20.
The flatness of the ground is usually required in the 2M variety of the distinction is not higher than 2mm, if the distinction is large, the floor coating must be thickened to decrease the distinction.
( a) If the ground on which the painting is to be used is in the water and the subfloor table is high, the concrete subfloor will be waterproofed.
( a) New concrete dried for a minimum of three weeks with a moisture material of no greater than 8 percent.
It can likewise be painted on terrazzo and other substrates.
2. Substrate treatment methods for new concrete substrates, utilizing the following treatment methods.
Treatment Purpose: Enhance the overall flatness of the ground, remove floating layer and dirt, and obtain an uniform rough surface area for covering adhesion.
Treatment devices: Self-absorbing ground grinding device (imported from Japan) and vacuum cleaner.
Requirements: To attain a strong ground without any trachoma or holes, and at the very same time, dry and tidy, devoid of drifting dust, oil spots, cement sand and other debris.
Various paint options
Traditional floor coating often does not make a stringent selection of paint, only using top coat to paint 1-2 coats, not utilizing closed guide, or randomly using a comparable steel structure with the very same primer to paint. The construction of epoxy floor covering paint is made from epoxy guide, epoxy medium paint, epoxy putty layer and epoxy leading paint in layers, so as to ensure the wear resistance and pressure resistance of epoxy floor covering and preserve the beauty of conventional oil and gas floor covering.
Modern flooring paint covering techniques have actually seen significant innovation
The traditional way of applying floor covering paint is spraying, brushing or roller, but the flooring engineering company innovates the method of finish according to the construction efficiency and covering requirements.
The concrete power trowel machine mentioned above has another kind of trip on power trowel, which can considerably enhance the precision and effectiveness of the building and construction.
Please sign in to leave a comment.